And now that we've covered the basics of what water bongs are and how they work, the next question is: do you use them? Do you smoke this new technique of smoking using a water pipe? If you answered yes, you should be aware of the following basic yet crucial advise from Eaglebongs:
A hookah is an excellent way for a new smoker to get their feet wet in the realm of smoking.
Keep in mind, though, that you don't want to inhale as long or as violently as other experienced smokers, since this may result in excessive coughing.
If you believe you're about to cough, move your mouth away from the bong.
When you cough into the bong while still holding the pipe and bowl, everything (even tobacco or cannabis) goes flying.
Water that has been left stale or unaltered for a lengthy period of time may acquire an unpleasant odor.
To maintain your bong tasting smooth and nice, clean it with a simple combination of salt (preferably coarse salt) and alcohol (the more USD the better).
Shake it a few times and submerge it for a few seconds to remove all of the resin.
If you're in pain because a touch has damaged your lungs, "take a few deep breaths" (even if it hurts) and the pain will subside in a few seconds.
By rejuvenating your lungs, you can avoid coughing and pain.
If you cough and feel as if you're breathing through the wrong end of a flamethrower, and your throat continues to burn after inhaling new air, eating something sweet usually helps.
It's best if it's non-carbonated and freshly made.
An open can of Pepsi that has been in the fridge since the night before has become your new best friend.
It will be simpler to get the rest of your mix if you push the lighter against the bowl, making it airtight.
Use a little toothpick, ideally an unfolded paper clip, to remove product residue and ashes from the bowl after use to make things easier and smoother for the other person.
If you flavor the bong with Gatorade or another fruit juice (apple, white grape), it will stick to it and make it less efficient because the sugar molecules wrap around the THC, making it more difficult to absorb into the bloodstream.
To maintain track of where the lighter and bong are, give them to the next person.
Clean your bong with 90-100 percent ethyl alcohol and any coarse salt, then shake it up and put it in the bathroom.
If the resin sticks to the toilet, flush it right away, then rinse off any alcohol or salt residue before refilling it with water and smoking again.
By adding a few drops of milk to the water, the glass is covered and the harshness is reduced by preventing the resin from clinging to the glass's edges.
Wash every 3-4 days.
According to a buying guide, here's all you need to know about bongs.
How do you smoke from a bong?
What are the benefits of the experience for me?
You may have these and other questions if you're just starting started with marijuana and these hookah brothers.
But don't worry, we'll be here to assist you.
Here are the most frequently asked questions about bongs for smoking marijuana, tobacco, and other substances.
Components of the bong
The basic function of a bong is to filter smoke from the substance being taken.
Before reaching you, you must pass through water (in some cases ice).
As a consequence, the experience will be more fresh.
It's a fantastic plan for those who are just starting started.
But, exactly, what are the parts of a bong?
Then, to assist you better understand a bong, we'll go through each of its components:
oBowl: The bowl of a bong is the part of the bong where you'll smoke.
In some cases, this element may be made up of a one-of-a-kind material (usually steel or copper).
oStem: How do the bowl and the bong relate to one other?
Everything is OK with the stem.
It's a tube that links the bowl and base of the bong.
Because the stem's base is mostly hidden, it comes into contact with water.
oBase: Logically, the contraption's pillar should be the bong's inner portion.
It is usually rather huge because it is where the water is deposited.
The bottom of a bong is sometimes shown as a pool of boiling smoke.
oCamera: There's nothing strange about this device.
The pipe is responsible for transporting smoke from the base to the mouthpiece, and eventually to your mouth.
oMouthpiece: Before reaching your mouth, the smoke passes through the mouthpiece.
A mouthpiece is the term used to describe the upper aperture of a bong.
You must set your lips to appreciate the substance when inhaling the smoke.
oCarburetor: Some bongs, particularly those made of glass, feature carburetors.
Normally, it is removable.
These are little holes that are visible above the surface of the water.
They're in charge of keeping the smoke out of the chamber in check.
Glass bongs and acrylic bongs are two distinct types of bongs.
Although bongs may now be made out of nearly any material (for example, bamboo bongs), acrylic and glass bongs are the most common.
No bong is preferable to another a priori.
It all depends on the quality of the goods and, most significantly, your needs.
But let's look at this table of comparisons in more detail:
The Advantages of Smoking with a Bong
What are all those strange weed-patterned tubes and ornaments strewn everywhere, as well as Ethiopian and Rastafarian flags?
Without a question, it's marketing.
Aside from that, though, the product is wonderful and provides a superior experience.
Do you want to find out more about its advantages?
We've compiled a list of them below:
Possibility of reducing long-term consequences
The elimination of hazardous components is aided by smoke that has been filtered with water.
The tastes' texture has been enhanced.
It's really easy to use and maintain.
Cost-effective and long-lasting
It allows you to regulate how much you smoke.
It's a more genuine encounter.
How to get a bong ready to smoke
Smoking using a bong may be an unforgettable experience, but first you must understand how to operate one.
No one is born understanding how to use a bong, and no matter how much we explain, only time and consistent use will make you into a true master.
But, first and foremost, talking about how to prepare a bong for smoking is a good idea.
1.Fill your bong with water: Before using your bong to smoke marijuana or tobacco, you must first fill it with water.
It's a really simple process.
The bong's stem should be partially immersed in it (about 3 to 7 cm from it, depending on the size of the bong).
Tea or fruit juices, for example, can be added to vary the flavor of your puffs.
2.Fill the bowl: You can leave the stem in the bong or remove it.
It is suggested that you crush the bud.
You might also employ the use of a filter.
Remember to put the stem in the bowl before you start smoking if you haven't already.
3.Start by lighting the bud: Grab the bong and place your mouth on the mouthpiece after it's lighted.
Take a deep breath and prepare to exhale.
When lighting the grass, take careful not to burn the bowl any longer than necessary.
4.Generate smoke and fill the bong: Inhale to enable smoke to settle in the chamber while performing the previous step.
While you're doing this, cover the carburetor on your bong.
The hit is almost upon you once you've generated the right quantity of smoke.
Make the necessary preparations.
5.Empty the bong: Do you have enough smoke already?
Empty the chamber and release the carburetor by inhaling.
If it doesn't have a stem, you'll have to remove it.
It's not the end of the world if there's still smoke in the chamber after your first hit; try again!
Criteria for deciding on a purchase
Now that you know more about smoking bongs and their benefits, you're probably already convinced to buy one.
Logic requires that, like any other purchase, the decision must be well-considered.
When we say "smart buying," what precisely do we mean?
To select a product that is most suited to your needs.
You can do so by concentrating on the following purchasing criteria:
Bongs may be classified into three types based on their shape: those with a hole or carburetor, straight tubes, and bongs with a spherical base.
The carburetor is an afterthought rather than a design feature.
It is most often found in ceramic or glass bongs, although it may be found in other varieties as well.
But let's look at these three features in more detail:
Carburetor: This has already been mentioned.
Smoke can accumulate or escape via these holes, depending on whether you cover them with your thumb, for example.
They not only release smoke, but they also aid to speed it up by mixing it with fresh air.
Straight tube: They have a simple design and are spike-like in length.
They're shaped like a conical tube.
Some users prefer bongs with a long, straight pipe.
What is the rationale behind this?
They say that the smoke is fresher when it reaches the smoker since it takes longer to inhale.
Despite their look, these are not laboratory instruments.
The process is the same as with a straight tube bong.
The primary distinction is that they are more stable since they have a larger foundation and are not confined.
Size and capacity are tightly linked.
Due to the shape of their bases, round base bongs have a huge capacity.
They may, however, be more difficult to handle, especially if you just plan to use them once.