(cheap dab rigs )
Puffco has been delivering high-quality vaporizers from Brooklyn, New York, for than a decade. There are few exceptions to this rule, and the Puffco Plus is no different.
As soon as you get your hands on the Puffco Plus, you'll undoubtedly want to learn how to utilize it. That's why we'll walk you through the process of vaping your waxy concentrates in this article.
What are you waiting for? Let's get started with your wax jar.
Who knows what's inside the box.
The Puffco Plus Wax Pen itself, as well as a USB charger and cleaning swabs, are all included in the box.
Just grab your Puffco Plus and charger and go on to the next step to get started.
The Puffco Plus has to be charged.
Before using this or any other vape pen, be sure it is completely charged. Even though your vape pen comes with some juice, charging it to capacity will give you more time to experiment with it.
It's simple to recharge. Unscrew the Puffco Plus above the button with your bare hands. Plug the charger into the battery, then screw the battery in. When you connect it in, the indicator light should be red, and it should turn green when it's ready.
An hour and a half is approximately right for a complete recharge. Grab your concentration and we'll get started as soon as it's ready.
How to be ready for your Puffco Plus
The first step in the process is to do a burn-off cycle without using the device or breathing any smoke. If there are any residues in the chamber that need to be burned out, this will be a good place to start.
Once you've pressed the cloud button five times, your Puffco Plus will be unlocked and ready to use. Once the procedure is complete, push the button five times to lock the device and allow it to cool down for a few minutes.
You can now load the device when the burn-off cycle is complete.
Remove the mouthpiece from the chamber by removing the screw that holds it in place. With a built-in dart, the Puffco Plus is simple to load. All you have to do is reattach the mouthpiece after dabbing it with the dart.
If you have 0.2 or 0.3 grams of concentrate, you should load the device and run the Sesh Mode three times until the substance is gone.
In order to use the Puffco Plus, one must
Vaping may begin now that your device has been charged and loaded with e-liquid. To re-unlock the smartphone, simply press the button five times in quick succession. You may cycle through the following temperatures by pressing the button four times in a row:
GREY - Low temperature (about 580°F or 305°C)
Medium heat (650°F or 343°C)
White represents a high temperature of 382 degrees Celsius (or 720 degrees Fahrenheit).
Higher temperatures produce denser clouds, while lower temps provide superior taste.
For uniform heating of the concentrate, hold the instrument straight up after selecting your desired temperature. Simply keep pressing the button for eight seconds to activate the heater.
Alternatively, you may select Sesh Mode by pressing the button twice. This will give you a continuous hit for 12 seconds, although you may want to wait after the first two or three usage to prevent the device from overheating.
Puffco Plus cleaning
Once you've vaporized the entire load, cleaning up is a breeze.
Allow the chamber to cool down until it reaches a temperature of slightly above freezing. After that, remove the mouthpiece and clean the chamber with the included swabs or a regular cotton swab. The dart and the threading should be done in the same way.
Vaporizers that are kept clean after each use can help extend their lifespan and provide the purest, most potent vapor possible.
This vape pen is perfect for those who want a sleek, minimalist design with good vapor output, and the Puffco Plus delivers just that.
Is there anything else you'd want to know about? We offer a wide selection of vaporizers and dab rigs, so be sure to check them out before your next dabbing session!